Calculating roof pitch

Slope pitch conversion, % pitch to degrees pitch can be found here.

I’m calculating a suitable roof pitch (truss roof) to allow at least 30cm of insulation to exist at the inside of the bale wall (interior) to minimise heat loss on this area of the house. The solution can be a raised heal but alternatively the slope of the roof can be formed so that insulation can be maximised.

I just read on that the Romane tile can have a minimum of 15 05 degrees pitch (27%).

I’m just going to work the numbers with a 25 degree pitch to make the roof above more shallow.

25-degree pitch would give 2.07 metres to the eves

0.44 meters at the internal edge of the bale in the roof

25 degree pitch is 46.6308%

Wood cladding of walls cost estimation

revêtement extérieur en bois
produits de bardage
poser un bardage extérieur en bois

7m x 9m house = 8m x 10m exterior.
Approx 2.4 metre high rooms
Approx height of the roof at the apex with 33% incline will be 1.23 metres

So total surface area of 7m x 9m Greb house (internal) with Truss Roof is

2 x 38.4m sq+
2 x 48m sq+
2 x 4.92m sq
= 76.8 + 96 + 9.84 = 182.64 m sq

chausson bardage
19.90 Euro/ m sq = 3,643 euro (whole house)

leyroy merlin
11.90 Euro/ m sq = 2,193 euro (whole house)

leyroy merlin
12.90 Euro/ m sq = 2,356 (whole house)